Fire separation, smoke alarms, bushfire protection, and emergency egress
20 articles
What This Requirement Covers Performance-based fire engineering solutions under the National Construction Code (NCC) provide an alternative to the prescriptive...
What This Requirement Covers Smoke hazard management in high-rise buildings refers to the design, installation and operation of systems and arrangements...
What This Requirement Covers Fire compartmentation for Class 2 buildings (apartments and other sole-occupancy units in the same building) sets the minimum...
What This Requirement Covers The combustible cladding restrictions and testing requirements in the National Construction Code (NCC) govern the use, performance...
What This Requirement Covers This requirement sets out when and how fire hydrants and fire hose reels must be provided in Australian buildings to support...
What This Requirement Covers This requirement addresses the fire safety measures that apply to outdoor decks, verandahs and similar external elevated platforms...
What This Requirement Covers Passive fire protection (PFP) for multi-residential buildings covers the fixed, built-in systems and constructional measures that...
What This Requirement Covers The Flame Zone (BAL-FZ) construction material requirement governs buildings located in areas subject to direct flame contact from...
What This Requirement Covers This requirement covers the minimum fire-resistance performance and installation standards for fire doors and related door...
What This Requirement Covers Maximum travel distance to fire exits is the limit on how far a person may have to travel from any point inside a building to an...
What This Requirement Covers Buildings located close to bushland face increased risk from bushfire attack - including radiant heat, ember attack, and direct...
What This Requirement Covers Emergency lighting requirements ensure that, if the normal lighting fails during an emergency, occupants can see exits, identify...
What This Requirement Covers This requirement covers the design, installation, commissioning and monitoring of automatic fire sprinkler systems in buildings in...
What This Requirement Covers This requirement addresses the fire separation between a private garage (Class 10a) and a dwelling (Class 1) where the garage and...
What This Requirement Covers This requirement covers the mandatory installation, power supply, location and interconnection of smoke alarms in residential and...
What This Requirement Covers These provisions set out the minimum fire exit and egress requirements for multi-storey buildings under the National Construction...
What This Requirement Covers Fire Resistance Levels (FRLs) specify the minimum passive fire performance of building elements by measuring three criteria:...
What This Requirement Covers Fire separation between attached dwellings requires a fire-resisting physical division where two or more dwellings share a common...
What This Requirement Covers The Bushfire Attack Level (BAL) system measures the level of exposure a building site has to ember attack, radiant heat, and...
What This Requirement Covers Smoke alarm placement rules set out where smoke alarms must be located, how they must be powered and interconnected, and which...